Est. 1981... A Division of Crystal Clear Antenna Services

         

Opentel

Features and Specifications

Tuner & Band Switching


Input frequency: UHF: 471MHz to 860MHz, VHF: 50MHz to 470MHz
Input Level: -80dBm ~ - 20dBm
Connector: IEC Female & Male
Impedance: 75 Ohm Unbalanced
Channel Selection: PLL Synthesizer
IF Band Width: 6/7/8MHz selectable

Demodulator Odt3000ftt


OFDM: Spectrum 2K and 8K Carrier modes non-hierarchical and hierarchical
Modulation Mode: QPSK, 16QAM, 64QAM
Guard Interval Mode: 1/3, 1/16, 1/8, 1/4
FEC Decoder: Active Symbol Duration 1/2,2/3, 3/4. 5/6, 7/8

Video Decoder


Video Decoder: MPEG-2 ISO/IEC 13818-2
Profile Level: MPEG-2 MP @ ML
Video Format: 4:3, 16:9, Letterbox
Video System: PAL <> NTSC Converter

Audio Decoder

Audio Decoder: MPEG-2 Multi-Channel
Sampling Frequency: 32, 44.1, 48KHz
Audio Channel: Mono, Dual Channel Stereo, Joint Stereo

Chip & Memory

CPU: 32 Bit RISC CPU
Memory: 1MB Flash, 8MB SDRAM,
2KB EEPROM

Demultiplexer


ISO/IEC 13818-1 Compliant

Serial Data Interface


Connector: 9 - Pin D-Sub (Male)
Signal: RS-232 Max. 115200bps

RF Modulator

Modulator Output: Ch21 ~ Ch69
Video Type: PAL B/G, I, D/K

Audio/Video Connectors


TV SCART: RGB, CVBS, Audio L/R
VCR SCAR: CVBS, Audio L/R
Audio Output: 2 x RCA Cinch (L/R)
Video Output: 1 x RCA Cinch 1 x S-Video
Digital Audio Output: 1 x Toslink Optical

Power Supply


Input Voltage: AC 95 to 240V, 50/60Hz
Type: SMPS Power Consumption: Max. 30W

Physical Specificiation


Operating Temp : +5ºc to +40ºc
Net Weight: 2.5Kg
Dimensions: 300(W) x 210(D) x 60(H)mm

Back To Set Top Box Page

08 9247 3749

Perth Western Australia

Email